Aluminium Sheets – Rolled-in designs

according to DIN 1725/1745/59605 EN 573-3 / 1386

Zänker & Dittrich NE-Metallhalbfabrikate

To see the complete table, tilt your phone 90 °.

Abbreviations Material numbers Stucco-Dessin  /  w.h.
AW-Al 99,5  /  Alu 99.5% AW-1050 A  /  3.0255
thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2
0.80 x 1000 x 2000 2,160 1.00 x 1250 x 2500 2,700 1.50 x 1000 x 2000 4,050
0.80 x 1250 x 2500 2,160 1.20 x 1000 x 2000 3,240 1.50 x 1250 x 2500 4,050
1.00 x 1000 x 2000 2,700 1.20 x 1250 x 2500 3,240 2.00 x 1000 x 2000 5,400
Abbreviations Material numbers hammer blow  /  w.h.
AW-Al 99,5  /  Alu 99.5% AW-1050 A  /  3.0255
thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2
0.80 x 1000 x 2000 2,160 1.00 x 1000 x 2000 2,700 2.00 x 1000 x 2000 5,400
0.80 x 1250 x 2500 2,160 1.50 x 1000 x 2000 4,050    
Abbreviations Material numbers duet  /  w.h.
AW-Al Mg 3  /  Al Mg 3 AW-5754  /  3.3535
thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2
2.5/4 x 1000 x 2000 7,500 3.5/5 x 1000 x 2000 10,250 5/6.5 x 1000 x 2000 14,250
2.5/4 x 1250 x 2500 7,500 3.5/5 x 1250 x 2500 10,250 5/6.5 x 1250 x 2500 14,250
2.5/4 x 1500 x 3000 7,500 3.5/5 x 1500 x 3000 10,250 5/6.5 x 1500 x 3000 14,250
Abbreviations Material numbers quintet
AW-Al Mg 3  /  Al Mg 3 AW-5754  /  3.3535
thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2 thickness in mm x Format weight in kg/m2
2.5/4 x 1000 x 2000 7,500 3.5/5 x 1000 x 2000 10,250 5/6.5 x 1000 x 2000 14,250
2.5/4 x 1250 x 2500 7,500 3.5/5 x 1250 x 2500 10,250 5/6.5 x 1250 x 2500

CONTACT US!

Zänker & Dittrich GmbH & Co. KG

Industriestr. 61
D-42551 Velbert

Call us!

Tel. +49(0) 20 51 / 20 80-0
Fax +49(0) 20 51 / 60 44 00

Write us!

info@zaenker-dittrich.de